Mattock
A Kheper deep-seam dredge shaped like the tool it is named for. A broad swept cutting header crosses the bow with four seam cutters in armored ball sockets along its face and a heavy fifth under the bridge, a covered conveyor runs down the spine to an arc-furnace smelter, and the ore rides in bunkers under heavy hatch covers. Sixteen small drives push it home full. Built for pilots who have outgrown the Stonecutter.
Overview
Deep-seam dredge: five seam cutters on a pick-head header, +0.5% mining yield per Mining level, a 22,000 m³ ore hold and an on-board furnace
Slots and bonuses
7 high (5 M utility, 2 S turret) · 5 mid · 4 low.
- Utility M 5Utility mount · medium. A tool mount, not a gun mount: no guns or missile launchers fit here. Takes size M: mining lasers, salvagers, Seal Breakers, Splice Rigs, barrier projectors, nanite projectors. Sizes must match exactly (M), except salvagers and Seal Breakers and Splice Rigs: a smaller one fits too.
- Turret S 2Turret mount · small. Turns on its own to track a target anywhere above its deck, so it keeps firing while you orbit or fly past. Takes size S: energy guns, mass drivers, missile launchers, point defense, salvagers, Seal Breakers, Splice Rigs, barrier projectors, nanite projectors. Sizes must match exactly (S).
- Mid slots 5Mid slot · shields and electronics. No mount restrictions: takes any mid-slot module. Barrier regenerators, amplifiers and weaves, thrusters, point defense, jammers, scanners, doctrine arrays, the shroud and guidance rigs. Only this class of hull can fit: Lightfold Cloak.
- Low slots 4Low slot · armor and engineering. No mount restrictions: takes any low-slot module. Platings, nanite repair arrays, bracing, cell banks, hold extensions, augers and launcher rigs. One armor plating per hull.
Hull bonuses
- Mining yield per Mining level
- +0.50% per level
Requirements
- Mining 80 to fly
- Piloting 30 to fly
- Industry 45 to manufacture
How to get it
Manufactured at a station with Industry: one run makes 1 in 3h 0m. It needs the blueprint Mattock Blueprint.
Bill of materials
One run makes 1. Expand an input to see what it takes.
4,700×Hull Plating 4,700 runs · 39h 10m
- 94,000×Ferrium refined from Ferrosite, Silvarite, Cobaltine, Aurelium, Grayfall Regolith, Ilmenite Sand
- 18,800×Cobaltium refined from Cobaltine, Voidstone, Meteoric Iron-Nickel
320×Thruster Assembly 320 runs · 5h 20m
- 3,200×Ferrium refined from Ferrosite, Silvarite, Cobaltine, Aurelium, Grayfall Regolith, Ilmenite Sand
- 1,600×Pyronite refined from Pyrestone
- 960×Cryo Isotopes refined from Glacite, Cold-Trap Ice
1,050×Power Cell 1,050 runs · 11h 40m
- 6,300×Pyronite refined from Pyrestone
- 4,200×Ferrium refined from Ferrosite, Silvarite, Cobaltine, Aurelium, Grayfall Regolith, Ilmenite Sand
- 1,050×Magmatic Salts
800×Quantum Processor 800 runs · 10h 0m
- 4,800×Siliqon refined from Silvarite, Grayfall Regolith, Helium-3 Fines, Impact Glass
- 1,600×Aurelite refined from Aurelium, Rare-Earth Nodules
- 800×Rare Earths refined from Rare-Earth Nodules
210×Shield Emitter 210 runs · 3h 30m
- 630×Aurelite refined from Aurelium, Rare-Earth Nodules
- 420×Void Matter refined from Voidstone, Xetite, Impact Glass
- 420×Siliqon refined from Silvarite, Grayfall Regolith, Helium-3 Fines, Impact Glass
- 210×Heavy Water refined from Cold-Trap Ice
84×Warp Coil 84 runs · 2h 48m
- 168×Xetium refined from Xetite, Novacite, Core Song Crystal
- 336×Cryo Isotopes refined from Glacite, Cold-Trap Ice
- 168×Void Matter refined from Voidstone, Xetite, Impact Glass
Raw materials
Facts
- Kind
- Dredge · Tier 5
- Rarity
- Common
- Volume
- 86,000.00 m³
- Reference value
- ₡ 14,817,125
- Shield
- 17,000 hp
- Armor
- 14,000 hp
- Hull
- 28,000 hp
- Max speed
- 78 m/s
- Boost
- 125 m/s
- Cargo hold
- 22,000.00 m³
- Slots
- 7 high · 5 mid · 4 low
- Battery
- 1.63 MWh · 1.2 kV
- Charge rate
- 108 MW
- Peak output
- 293 MW
- Warp
- 0.16 AU/s
- Align
- 13.0 s
- Signature
- 380 m
- Shield regen
- 150 hp/s regen
- Turn
- 7°/s pitch · 7°/s yaw · 12°/s roll
- Dimensions
- 215 × 111 × 72 m
